Craft and technique
How to Read Film Edge Codes: Manufacturer, Type and Manufacturing Date
A step-by-step guide to distinguishing product and year marks, choosing the right date table and recording possible matches, with Kodak and DuPont examples and the limits of a manufacturing date.
An edge marking is not always a date. Kodak tables separate product codes from manufacturing-year codes; DuPont uses different correspondences. Start by identifying the inscription and consulting the matching system. These examples explain those distinctions and their limits. Stock manufacture may precede exposure of the images, and a date cannot replace a condition assessment.
A decision tree for reading edge codes
If the film is brittle or its condition is uncertain, seek preservation advice rather than trying to examine it. Unprocessed EASTMAN DOUBLE-X 5222/7222 requires total darkness for handling. Do not project film or run it through mechanical equipment unless its stability is known.1. Identify the format and transcribe the visible marking. Record letters, numbers and symbols in their observed order, leaving unclear characters uncertain rather than guessing. Other symbols on an edgeprint are not date-related, so do not treat every marking as a date.
2. Identify the manufacturer and the kind of code. Kodak’s product table lists EJ for product 5219 and EN for 5207; its separate manufacturing-year table lists EN as 08. The same letters can therefore have different functions in different tables.
3. Choose a year table for the relevant manufacturer, format and, where specified, manufacturing location and period. Kodak’s historical schemes distinguish Canada, the United States and the United Kingdom in some periods. The historical DuPont chart lists KL for 1956 and KLT for 1966. Do not transfer a match from one manufacturer’s system to another.
4. Check for repeat cycles and qualified entries. Kodak’s US symbols were reused every 20 years, with an exception for 1968, until 1982, when a third symbol was added. Some Film Forever 8 mm entries for 1942–1953 are marked possible or probable and are guidance, not certain identifications. Record compatible dates and retain any qualification instead of forcing a single answer.
5. Separate manufacture from image exposure and condition. The code concerns the stock’s manufacture; images may have been exposed later, and a reel may combine film from different dates. A manufacturing mark does not establish the film’s preservation condition, nor should its date alone determine whether it can be played.
For a record, note the format, manufacturer, transcription, table and entry used, possible dates and unresolved ambiguity. This organizes the reasoning; it does not turn an approximate match into a confirmed identification.
Where to look for the markings
Kodak manufacturing dates are usually printed in the margin outside the perforations. Other symbols on the edgeprint may not be date-related, so record each mark without assuming its function. In the historical Kodak/DuPont chart, read the markings from left to right and compare them with the table for the relevant manufacturer. If a character is unclear, preserve that uncertainty in the transcription. Box inscriptions can be inaccurate, and a reel may no longer be in its original container.Product and year codes are different
Kodak’s KEYKODE ID Table separates product codes from manufacturing-year codes. They are not one list. In the product table, EJ corresponds to 5219; that identifies a product, not a year. A year mark alone does not specify the emulsion or format, so use the identified product’s technical information for those details.The EASTMAN DOUBLE-X technical information identifies 5222 as a 35 mm panchromatic black-and-white negative film and 7222 as the 16 mm version. Product identification and technical details serve a different purpose from a manufacturing-year mark. When recording a code, preserve the characters as they appear and leave unclear symbols uncertain.
Kodak examples: product and year
In Kodak’s product table, EJ corresponds to 5219 and EN to 5207. The separate Manufacturing Year Codes table lists EN as 08 and SD as 00, and AE as 2026. These are the entries as printed; interpreting a particular marking requires identifying which table and system apply.EN appears in both tables, so it does not have a single function across the documentation. Record the marking and the table heading separately. A product-table entry is not a manufacturing date.
DuPont and other systems: examples in context
In AMIA’s historical DuPont chart, look up KL and KLT: they correspond to 1956 and 1966 respectively. The chart lists years from 1956 to 1974. Those correspondences belong to DuPont, not Kodak’s product table. For Fuji, Agfa or another manufacturer, seek documentation for that system and period; do not transfer Kodak or DuPont entries merely because the characters look similar. The date obtained concerns stock manufacture. Film may have been exposed later, and material of different dates may have been edited together.Choosing a table: format, country and period
Choose a table for the manufacturer, format, location and period it covers. In Kodak’s historical US scheme, year symbols were reused every 20 years, with an exception for 1968, until 1982, when a third symbol was added to allow unique date coding. The historical symbols repeated every 11 years in Canada from 1925 to 1950 and every 19 years in the UK from 1917 to 1950; after 1950, those territories matched the US system. Do not use an earlier territory’s table as if it were interchangeable with another’s.Kodak’s dating schemes changed over time and depended on the equipment. Since 2001, most manufacturing-year information uses two-character alphabetic or numeric codes, or four-digit numeric codes; some Super 8 film may have symbols as late as 2005. A pair of letters should not be treated as a date until its code system and function have been identified.
Some Film Forever 8 mm entries for 1942–1953 are guidance marked possible or probable. Keep those qualifications, and record multiple compatible dates when a code repeats.
KEYKODE and added numbering
KEYKODE uses machine-readable barcodes that reproduce the human-readable key number. The numbers are printed every half foot, with a reference dot identifying the corresponding frame. They can be logged to locate material and, during a telecine transfer, correlated with video and audio timecode when used.That correlation does not turn timecode into a manufacturing year. Distinguish the work and indexing numbers from the manufacturing mark, and use the relevant date table to interpret the latter.
Limits of a manufacturing date
An old date does not diagnose a reel’s condition. Assess preservation separately: film may show shrinkage, mould, perforation damage or deterioration of its base. Acetate may develop vinegar syndrome; nitrate has specific flammability risks. SAFETY is not a condition report either: acetate film can deteriorate. Do not use projection as a test of good condition. A condition assessment helps plan preservation and digitisation without basing that decision solely on the year you have read.A practical record sheet
A useful record can include the manufacturer, format, transcription of the mark, table and entry consulted, possible date or dates, and unresolved questions. Keep observations about condition separate from the interpretation of the code.Retain qualifications such as possible or probable. Box inscriptions can be inaccurate, and film may no longer be in its original box. Film made on different dates may later be edited together, so do not force one date onto an entire reel or group.
Key takeaways
- Identify the manufacturer and coding system before looking for a match: the same pair of letters can indicate a product or a year.
- Kodak separates product and manufacturing-year codes: EN appears in both tables. In the year table, EN is listed as 08 and SD as 00; DuPont lists KL for 1956 and KLT for 1966.
- Use a table for the relevant manufacturer, format, location and period. Some historical 8 mm entries are guidance rather than certain identifications, so a repeated or qualified match may leave more than one possible date.
- Stock manufacture, image exposure and preservation condition are different matters. KEYKODE can be correlated with timecode to locate material; that correlation does not date manufacture.
- Unprocessed EASTMAN DOUBLE-X 5222/7222 requires total darkness for handling. Do not project film or run it through playback equipment unless its condition is known to be stable enough.
Sources and filmography consulted
- Kodak KEYKODE ID Table and Manufacturing Year Codes. www.kodak.com. Consulted 13 Nov 2026
- AMIA: Eastman Kodak and DuPont film date code chart. amianet.org. Consulted 13 Nov 2026
- Kodak TI-2660: A Guide to Identifying Year of Manufacture for KODAK Motion Picture Films. www.kodak.com. Consulted 13 Nov 2026
- Library of Congress: Care, handling and storage of motion picture film. wwws.loc.gov. Consulted 13 Nov 2026
- Film Forever / East Anglian Film Archive: Kodak edge codes. www.filmforever.org. Consulted 13 Nov 2026
- THE ESSENTIAL REFERENCE GUIDE FOR FILMMAKERS. www.kodak.com. Consulted 13 Nov 2026
- National Archives: Determining condition of motion picture film. www.archives.gov. Consulted 13 Nov 2026
- Kodak EASTMAN DOUBLE-X technical information. www.kodak.com. Consulted 13 Nov 2026
- University of Illinois PSAP: film formats, handling, base materials and preservation. psap.library.illinois.edu. Consulted 13 Nov 2026
- Kodak Film KEYKODE Numbers. www.kodak.com. Consulted 13 Nov 2026
- Glossary of Motion Picture Terms. www.kodak.com. Consulted 13 Nov 2026